![]() ![]() For larger graphics, you will need to peel back a few inches of the release liner at the top to expose a section of the graphic and spray that section with water. If you are installing a smaller window decal, you can peel the decal off the release liner and spray the back liberally with water. This will allow you to move the window graphic around some during installation and smooth out any bubbles. The graphic will not adhere to silicone edging. Graphics should be trimmed so that they are at least 1/8" away from window frames and seals to allow for expansion. Alcohol is the most effective and safest cleaner to use. Do not use any cleaner that contains ammonia or it can cause the adhesive to fail. Static Cling will adhere to glass and other smooth surfaces.Ĭlean the surface and dry with a lint free cloth. Wash your hands before you start and touch the adhesive surface as little as possible during installation. ![]() It's important to make sure you don't get oil or dirt from your fingers on the adhesive when you start to peel the graphic from the release liner. Static Cling window decals are best installed with water. Short term window graphics that face mount to the glass from the inside to be viewed from the outside. Designed for home or business windows, it's won't stick securely enough for use on the outside of vehicle windows. It needs to be reapplied periodically to keep it securely on the window. It also doesn't stay stuck to windows for long periods of time. Static cling doesn't stick well to cold surfaces, so it will fall come off in cold weather. ![]() Clear static cling can be printed so either the back or face of the print sticks to the glass. The static cling surface isn't adhesive so it can be reused repeatedly, and cleaned if it gets dirty. If you want your design printed so it looks correct without illumination, chose the 3 Layer Printing white ink option so the graphic will look correct both with and without illumination.Īpproximate outdoor longevity is 1-6 months, indoor longevity is 5-10 years. ![]() You can see the half with the white underprint is much darker from the inside, but the image is still visible through the white when there is bright light outside.Ĭlear window graphics are printed so the colors look correct when installed on glass and light passes through them. There is also a photo showing what the graphic looks like from inside looking out. There is a comparison of the graphic in full sun with glare, and in shadow so you can see the difference this makes in visibility from both side. The product photos above show the Clear Static Cling sample on a window with the right half of the image having a white floodcoat under the photo, and left half without. A white flood coat is recommended for the best visibility in a window, and the white can be applied over the entire graphic, or just to the printed areas leaving the blank areas clear. Clear clings can be printed so either the back or the face is adhered to the glass. Clear static cling vinyl decals will adhere to glass and other smooth surfaces, making for easy and economical window clings that can be used again and again. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |